Mini (Low profile) base mount that can be glued to all NERIS kayak PVC / TPU decks. Needs an intermediate mini base female mount adapter (T-bolt mount adaptor Fs218 to allow for the rest of the BORIKA range to be used. This mini base mount is now a standard fitting on all Smart PRO kayaks (fitted on right rear deck)

NB - D-rings is not included as part of this base mount - this is a separate fitting. EG If the kayak has a rear cargo net, then the D-ring would be included as the base mount forms one of the corners

Photo is of an all black Neris SMART PRO - right rear deck

This intermediate female T-bolt mount adapter are for BORIKA low profile base mounts that do not have a female socket. EG Mp218 (see above) that is standardly fitted on the rear deck of Smart PRO's and for Mb218 on NERIS Accessory Bridges / Canoe Bench Seats

This intermediate female T-bolt adapter allows any of the BORIKA male accessories to be plugged in. This same female adaptor mount can be bolted onto the wings of Neris rudders (just needs a hole drilled into the rudder wing)

This very low profile Borika FASTen Round Pad is a great way to set up a mounting point on a wooden board (EG NERIS canoe bench seats) to use with a Borika adaptor accesory that have a T-Bolt (EG Fs218)

Screw this Mb218 mounting onto your hard surface, and you have the perfect place to attach a T-Bolt mount adaptor to.
.

T-bolt mini base mount adapter (Item Code Fs218) shown below - not included

Standard base mount with raised base - to affix to hard surfaces such as a wooden "accessory bridge" that can be clamped across the cockpit on the Alu and Valkure Series boats, or onto the Canoe bench seat "flaps" that are available with the Smart / Smart PRO kayaks. This female base mount "padlock" allows for any of the BORIKA accessories to be plugged in and secured.

Includes a cap to keep the socket clear of debris when not in use.

The mounting platform of the set is attached to a hard surface with four screws or self-tapping screws (supplied). The mount is fixed to the platform, following which the mount can hold various accessories of the FASTen series

NB - The mini base mount adapter (Item Code N-0947 Fs218) is not required

Universal Base Mount 61mm x 61mm (Low Profile)
Standard base mount with base bolts - to affix to hard surfaces such as a wooden "accessory bridge" that can be clamped across the cockpit on the Alu and Valkure Series boats, or on canoe bench seats made for the SMART / Smart PRO Series boats. his female base mount allows for any of the BORIKA accessories to be plugged in. 

This Borika FASTen universal base mount "padlock" allows for a quick and easy installation of the entire range of the Borika FASTen® accessories onto your boat or kayak. The mount is made of tough polyamide. It is quick and easy to install, designed to fit onto a hard deck or surface using the 4 x self tapping stainless steel screws provided.

Includes a cap to keep the socket clear of debris when not in use.

This base mount requires a hole (32mm dial) in the hard surface that this mount will be fixed to, to accommodate the male plug in part of FASTen accessories.

NB - The mini base mount adapter (Item Code N-0947 Fs218) is not required

Star adapter

With this unique star adapter, you will be offered a wide range of accessories for your boat. With this star adapter you can easily make any object to be a "FASTen" accessory by bolting this piece to the base of that item.. Items can be like small plastic Tupperware boxes, etc


Other Star adapters:-
With 360° rotation: item number: Code Mia (01.04.010.01.01)
With 360° rotation and tilt-able item number: Code TAm218 (01.04.011.01.01)

Holder for cameras and other items that have the standardised screw in base or "teeth" that fits into slots

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light into the FASTen universal base mount. The adjustable bracket has holes incorporated in it to tie off safety lanyards on cameras etc for piece of mind. Multiple positions can be achieved with adjustment in rotation and angle.

The advantages include the possibility of alternately using several accessories in the same mount. For example, in the daytime one can perform camera shooting while in the dark navigation lights can be fitted.

EXCLUDES camera

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or screw in hole (3/8th)

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light into the FASTen universal base mount. The adjustable bracket has holes incorporated in it to tie off safety lanyards on cameras etc for piece of mind. Multiple positions can be achieved with adjustment in rotation - for use on horizontal base mounts

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or screw in hole (3/8th)

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light into the FASTen universal base mount. The adjustable bracket has holes incorporated in it to tie off safety lanyards on cameras etc for piece of mind. Multiple positions can be achieved with adjustment in rotation - for use on horizontal base mounts

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or screw in hole (3/8th)

Adventuring late at night or early morning? The new Borika FASten Action Camera Holder could be for you.

This Borika accesory is perfect for getting those boating or kayaking camera shots while in low light conditions. The hodler can be used to attach two cameras or has a flexible clip for use with a torch, so you can always get your adventures on film no matter the conditions.

To attach this to your set up you just need to place this in an existing Borika action camera holder and tighten up with the hand screw.

Torch holder - dia 15-25mm

Almost every camera has a '(1/4')20-speed UNC thread' on the bottom of the housing, the so-called tripod thread. The accessory can be screwed onto this thread and thus keeps your camera on the boat. Also many action cameras have a (1/4') thread.

In some few models, especially for large format cameras, there is a '(3/8') 16-speed UNC thread'. In this case, use the item with the item number: Tp038.

The distance between the mount on the boat and the camera is 120 mm when fixed The camera can be tilted and the tilt angle can be fixed by hand by means of a large locking screw.

Product features:
- (1/4')20-speed UNC thread
- Mount for video photo and action cameras
- Extended camera by 120 mm
- 360° rotatable and tiltable

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or a standardised screw in hole (3/8th)

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light on the end of the 400mm long extension pole. Angles can be adjusted at three different points. Includes the camera base screw in knurled nut (3/8th size)

Excludes camera

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or a standardised screw in hole (3/8th)

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light on the end of the 600mm long extension pole. Angles can be adjusted at three different points. Includes the camera base screw in knurled nut (3/8th size)

This Borika FASTen Telescopic Swivel Camera Holder is a 2 stage telescopic extender (600mm / 23"). With the ability to tilt and swivel your camera you won't miss any of the action.

Excludes camera

Holder for cameras and other items that have the standardised "teeth" that fits into slots, or a standardised screw in hole (3/8th)

This Borika FASTen system holder is designed to secure a camera or Navisafe portable navigation light on the end of the 1100mm long extension pole. Angles can be adjusted at three different points. Includes the camera base screw in knurled nut (3/8th size)

This Borika FASTen Telescopic Swivel Camera Holder 3 stage telescopic extender (1100mm / 43") is ideal for taking shots of your trip on the boat. With the ability to tilt and swivel your camera you won't miss any of the action.

Excludes camera

Fishing rod holder with a rotating closure to secure fishing rod

This reliably secures and holds upright a fishing rod onto the kayak. It can be fitted in a mount in any position about its axis and conveniently adjusted for inclination relative to the horizon with a step of 30° as well as reliably secured in a selected position. The holder is equipped with a back rest for fixing the rod in position, thereby preventing it from axial rotation. The design provides for a locking ring that secures the fishing rod reel. This helps prevent loss of the rod during trolling or transportation. Also, it has a special hole to secure the rod with a safety leash.

Photo below - a light grey rod holder is plugged and secured into the black mini mount adapter (Fs218) which is attached to the mini base mount (Mp218) on the stern of a Neris Smart PRO

NB - intermediat female adaptor (Fs218) is not included

Designed for fixing a flashlight and other objects with a diameter of 15 to 25 mm. The design consists of an elastic clamp and a holder body, which is covered with an elastic soft insert inside. The body of the holder has projections for fixing of the clamp and is connected to the male a male adapter shaped as a 12 pointed star by 15° spline tilt joint. The tilt position is fixed with a square knob nut.

The holder together with the fixed flashlight can be 360° rotated without having to remove the adapter from the mount.

Assembly includes fasteners: M6*20 and M6*60 DIN 912 screws, an M6*25 DIN 931 bolt, an M6 DIN 985 and an M6 DIN 934 nuts. The main parts are made of fiberglass-reinforced polyamide, the fasteners — of A2 (AISI 304) stainless steel, the insert — of polyurethane.

Holds rods and tubes (EG torch) of diameter 30-40 mm, with elastic rubber clamp.

Rotates and tilts
- Easily adjusts to various angles
- The elastic clamp snaps quickly and firmly around your fishing rod, torch, or similar
- Clamp adjustable to different rod / tube diameters
- Easy and efficient to use

(Code Rh101)

Swivel-Tilt holder for TOPEAK range of Waterproof cases, Ridecases, Omni Ride case with strap mounts - (common phone cases used for bikes & motor bikes)

Rotates and tilts

Phone case is not included

Swivel t holder for LONAKO portable navigation lights

Rotates only

Swivel-Tilt holder for LONAKO portable navigation lights

Rotates and tilts

The best cart / trolley there is for foldable boats! Nothing beats this! All other carts serve only one main purpose and that is to transport assembled boats. This FOLDY does that AND also can carry packed (disassembled / folded) boats which is the main key factor in transporting "heavy" boats on your own.

This cart was specially designed for folding / foldable kayaks - simply the best cart available - there are no copycats (We've tried looking for cheaper ones). There are many kinds of kayak carts but none come anywhere as practical as this one piece FOLDY. Highly recommended.

This multi-purpose FOLDY can be:-
- fully opened into a 'stack truck' or luggage trolley - to carry packed kayak carry bags,
- folded halfway into a flat-top cart / dolly - to carry the assembled kayak,
- flat-packed - to put away inside or on stow top of the rear deck of the assembled kayak.

With large sized quick release pneumatic wheels and sturdy anodized aluminum frame, this cart will go over most types of terrain - soft sand to pebble beaches. Key cross bars have pairs of rubber tubular padding. Complete with a pair of kayak securing straps and a drawstring bag.

The FOLDY, with the wheels removed, is compact enough to fit through the cross-rib behind the rear seat of most folding kayaks and even through the cross-rib at the front of the smallest single seater kayak. Alternatively kayaks with deck lines / perimeter D-rings, the cart, can be strapped on top of the rear deck using the cart's own securing straps. A very practical and well made cart.
Size: 50 x 68 x 100cm - 'stack truck'
Size: 69 (axle) x 34 x 13cm - flat packed
Tyres: 260mm x 8cm
Weight: 4,9 kg

Minimalist cart originally designed for glass fiber sea and plastic touring kayaks. Shaped to fit through small hatches when folded and with the quick release wheels removed. Includes a single leg kick-stand. The main difference to the Eckla 'Canyon' is that the wheel axle bar does not go right across the frame to the other axle. White coated.
Dimensions unfolded: 53x27x25cm
weight 1,8 kg
loading capacity approx 40 kg
Tyres: 200 mm dia

Minimalist cart originally designed for glass fiber sea and plastic touring kayaks. With larger wheels than the Atlantic 200 making it suitable for heavier loads and rougher ground. Shaped to fit through small hatches when folded and with the quick release wheels removed. Includes a single leg kick-stand. The main difference to the Eckla 'Canyon' is that the wheel axle bar does not go right across the frame to the other axle. White coated.
Dimensions unfolded: 58x26x29cm
Weight: 1,8 kg
Loading capacity: 50 kg
Tyres: 260 mm dia

Basic kayak cart. The large quick release pneumatic tyres allows for easy transport of bigger kayaks / canoes when ashore. With a wide kickstand to keep the boat off the ground. Folds flat to stow under deck. Made of a solid high quality anodized aluminum alloy - will not rust.
Yellow coated.
Dimensions unfolded: 68x38x36cm
Weight 3,4 kg
Loading capacity approx 80 kg
Tyres: 260x85mm

Groundsheet carpet 2.5 x 5m

Use to protect your kayak's skin whilst assembling & dismantling in rough areas such as car parks or in "dirty"park areas such as grassy banks full of duck poo!

This self-draining breathable carpet is better than using ordinary tarpaulin groundsheets - no puddles. Also cushions any sharp points on the ground. Will not damage the grass at long stay campsites etc. Helps speed up the kayak / canoe cleaning, drying and packing process

Comes with bag so no water leaks into the car / van - anyway it's easy to shake most water out before folding the carpet.

Made of woven PU. Non-slip, rot proof, flame retardant & UV resistant.and easy to clean with water.

Measures 2.5 x 5m, which is wide enough for all the different Neris kayak models, with enough space on the sides to host the backpack bag and other bits. Longer kayaks such as the Smart PRO S / SMART-3 can be placed on the carpet diagonally

2.6kg

This rescue Knife has a rounded tip to avoid puncturing equipment or cutting yourself.
Serrated blade, ideal for cutting rope. non-locking blade, 7cm blade with rounded blunt tip. 12cm when closed. Yellow only.

- Serrated stainless edge
- Floating
- Not locking
- Hole for lanyard
- 7cm blade & 12cm handle
- Made in Italy

NB - this bladed product is not for sale to people under the age of 18.
Item code: MZ 10053

This rescue Knife has a rounded tip to avoid puncturing equipment or cutting yourself.
Serrated blade, ideal for cutting rope. Locking blade, 6.4cm blade with rounded blunt tip. 11.4cm when closed. Red only.

- Thermoplastic Handle
- One hand opening
- Locking blade,
- Lanyard hole
- 6.4cm blade
- 11.4cm when closed
- Made in Italy

NB - this bladed product is not for sale to people under the age of 18.
Item code: MZ 10054

This rescue Knife has a rounded tip to avoid puncturing equipment or cutting yourself.
Serrated blade, ideal for cutting rope. Locking blade, 6.4cm blade with rounded blunt tip. 11.4cm when closed. Red only.

- Thermoplastic Handle
- One hand opening
- Locking blade,
- Lanyard hole
- 6.4cm blade
- Made in Italy


NB - this bladed product is not for sale to people under the age of 18.
Item code: MZ 10056

The Folding shovel can be used to dig tyres out of sand or snow if a car becomes stuck. The tool includes a pick that can help crack ice or remove rocks. Since it's so compact and space-saving in design, a folding shovel is a great tool to have in any vehicle or a rucksack.

The Emergency Strobe Light is an essential outdoor survival item for any serious adventurer.

The Strobe serves as a vital visual aid for search and rescue services, should you be lost, injured or need assistance when outdoors at night. Visible for up to 1 mile on a clear night, the strobe is lightweight and easy to use, and emits 120 flashes per minute from the high-powered LED. The LifeSystems strobe is one of the lightest and most compact emergency strobes on the market.

- Bright orange outer casing
- High-powered LED with up to 1 mile visible range
- 120 strobe flashes per minute
- Easy twist on/off operation
- Waterproof to 300 meters
- Impact resistant casing with secure strap
- Up to 100 hours battery life
- 2 x ½AA batteries included
- Strap allows easy attachment of strobe
- CE Approved and ROHS compliant

Weight: 60 g (including batteries)
Dimensions: 114 mm x 23 mm x 23 mm

Locking lever ferrule
Adjustable alu shaft - between 210 to 240cm and feather angle
Drip rings
Shaped polypropylene with 40% fiberglass content blade
Black blade only

• Easy to assemble 4 piece construction with sturdy clip button
• Hole options to configure for left or right-handed operation
• Adjustable feathering (if required) for +60 or -60 degrees. 
• Non-slip hand grips & drip rings. 
• Lightweigh Aluminium tubes 
• Easy to transport
• Blade length 46cm x 17.5 cm width
• Total paddle length 220cm

As the name suggests, the Adventure is the ideal buoyancy aid for adventure on the water. If you are fishing, paddling or just looking for a vest with multiple pockets, the Adventure is an excellent choice. There are two front zip pockets, a large one to use for example, a bait box and a smaller one for a mobile phone. The Adventure also has several attachment points, a holder for pliers or multi-tool and retro reflective patches on the shoulders. The back has also two drain mesh pockets.

Red - Article number 5352
Black - Article number 5350

Sizes - S 30-50, M 50-70, L 70-90, XL 90+ kg

XS & S £20.00

M
£20.50

L & XL
£25.00

XXL
£28.00

Within 1 week

Scopreaga 'Halkey Roberts' valve screw-in hose adaptor for 20mm hoses.

5l foot pumps as originally issued with the Neris kayaks / packrafts use 20mm hoses. This is the main type of hose adaptor used to connect to the grey Scoprega 'Halkey Roberts' valves as fitted on earlier Neris kayaks / packrafts.

Item Code:

Hoses fitted with an bayonet type fitting can use this adaptor to screw into Leafield D7 valves.

Current Neris kayaks / packrafts that have black valves are Leafield D7's






Item code: 00300146

Ideal for the larger SMART-2 and SMART-3 !

Most air inflation pumps are either high pressure / low volume or low pressure / high volume, with very few pumps having both capabilities. The manual foot pumps that comes included with the NERIS Smart kayaks are of the high pressure / low volume type because you need to be able to attain the high pressures needed for that craft. The drawback is a longer pumping time, when you really want to be out paddling already!

This Bravo 100 Series pump enables pumping with less effort than other pumps with it's 2 x 2l action. Includes integrated pressure gauge. Can be switched to single action pumping

Bayonet fitting is for HR valves, suitable for earlier type NERIS SMART range of kayaks, as well as rafts, SUP's, inflatable boats and tents. Capable of pressures up to 1.9 BAR / 27.5 PSI

Item code: MZ-15157

Tear-Aid repairs, not only the foldable boat's skin and accessories, it can be used for other outdoor items such as canvas / nylon tents, sleeping bags, camp beds, ground sheets, tarpaulins, backpacks, dry suits, wet suits, jackets / cags, to name a few. Tear-Aid is available as Type A and Type B. Both types have the same unique qualities but each type is designed for a specific group of materials. Tear-Aid can be used to repair tears and holes in the centre of the material, as well as tears and holes on the edge of the material. For tear and holes on the edge of the material, a nylon line (supplied) is used to reinforce the edge of the repair.

Type A - Most materials other than vinyl and PVC. Suitable for Hypalon, TPU, CSM, canvas decks, nylon sponson sleeves, Cordura bags, spray covers / skirts, and sail sheets. 90% immediate adhesive strength, 100% adhesive strength after 1 hour.

Type B - Only for vinyl and PVC. Can be used immediately, 100% adhesive strength after 24 hours.

Each sealed sachet comes with a 7.6cm x 30cm patch, 4 alcohol pads, nylon line and instruction leaflet. You cut the patch to the preferred size (scissors not included). For optimal attachment, the patch needs at least 2,5 cm of coverage around the tear. For larger tears, longer/wider rolls are available on request.

Wooden floor mounted rudder pedals with low profile alu guide rail. The bottom half of the pedal is the footrest

Pedal unit position is adjustable along the guide rail and is fastened with the large star bolt. The pedal unit can be removed off the guide rail by sliding out on either end

Easily fit guide rail to the floorboard (not included) with supplied bolts. Requires two holes to be drilled into the floor board and be fastened with either permanent locking nuts or removable wing nuts.

Requires floor board/s to be permanently fitted to the keel frame. See Floorboards here

Super absorbent extra strong cleaning and drying sponges. Literally sucks in water by itself if the sponge is left in a water puddle - just like having an automatic cordless vacuum cleaner! Leave the sponges in bottom of kayak during your paddles in the best key positions where water mostly accumulates.

Essential piece of kit to keep packed in the foldable kayak backpack - for cleaning and drying the boat skin before packing away after a paddle. Easy to clean the sponges afterwards with soapy water, ready for the next paddle. If left exposed to dry out for a few days, these sponges become rock hard bricks, so its important to keep them moist!

Supplied with zip-lock plastic bag to keep sponges moist.

Sold in pairs